Time Code Displays & Monitors

A range of time code displays and monitors to display timestamps recorded with video, film, telemetry, radar, and other data. We are also able to offer aircraft mounted systems as well as units designed to work with Night vision Goggles (NVG).

ITS Model 6135A Miniature Time Code display

The ITS Model 6135A Miniature Time Code decodes and displays the IRIG B Serial Time Code. The unit displays the time as Hours, Minutes and Seconds on an LED display. The 6135A displays the applied time code, or in the absence of an applied signal, the internal clock. Display is six digits, HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.

The 6135A is housed in a flange mountable aluminium enclosure, 3.55 inches wide, 0.95 inches high and 2.0 inches deep (not including rear panel connector).

ITS Model 6075 Time Code Display

The ITS Model 6075A Time Code Display is a two function 9-character shelf-mount unit that decodes the NASA 36 or IRIG B Serial Time Code and also performs a counter function. The unit displays the time or alternatively the counter state as selected. A 12-charecter panel-mount version is available as the model 6075PM.

ITS Model 6275 Time Code Display

The ITS Model 6275 Time Code Display is a compact rack mounted unit that decodes and displays the IRIG B Serial Time Code. The unit displays the time as Days, Hours, Minutes and Seconds on an LED display. Unique packaging allows for full one inch high numerals while occupying only 1.75 inches of rack height. The 6275 displays the applied time code, or in the absence of an applied signal, the internal clock. Display is nine digits, DDD:HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.

The 6275 is housed in a rack mountable aluminum enclosure, 19 inches wide, 1.75 inches high and 1.5 inches deep (not including rear panel connectors). All circuitry is on a single SMT printed wiring assembly.

ITS Model 6062 Time Code Monitor

The ITS Model 6062 Time Code Monitor is a hand held, battery powered unit that provides a means of verifying the IRIG B serial time code and event outputs of LED camera drivers. The unit will display time derived from both serrated, non-serrated and demodulated IRIG formats. An automatic power shut down feature prevents battery drain when no signal is applied for a period of time. The 6062 is housed in a high impact plastic case and contains 16 digit LCD time display and event indicator. It is powered by four AA batteries and includes a battery eliminator pack.