Datum 9520 replacement Time Code Displays & Monitors - ITS

A range of time code displays and monitors to display timestamps to replace the DATUM 9520.

Model 6135A Miniature Time Code display

The ITS Model 6135A Miniature Time Code decodes and displays the IRIG B Serial Time Code. The unit displays the time as Hours, Minutes and Seconds on an LED display. The 6135A displays the applied time code, or in the absence of an applied signal, the internal clock. Display is six digits, HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.

The 6135A is housed in a flange mountable aluminum enclosure, 3.55 inches wide, 0.95 inches high and 2.0 inches deep (not including rear panel connector).

Model 6135B Miniature Time Code display

As the 6135A above but with 0.56" display, +24 to +32Vdc supply input. Power input < 2 Watts.

Articles

IRIG Serial Time Code Formats pdf (371kB)

Data

Comparison sheet pdf (67kB)

6135 Miniature Time Code display pdf data-sheet (94kB)

Gallery

(click to view)

Contact

Precision Timing:
Tel: +44 (0)1844 260600
Fax: +44 (0)1844 260126
Email us